Q-7 W

Flood/Blind/Strobe Light with 1000 cool white LEDs - IP65 - High output

More details


  • Black
  • White
  • Custom Custom

Availability: On Order

3 450,00 €

You will not be charged VAT with your selected delivery address.

- +

  • I I I I I

    Q-7 W

    • 1000 x cool white LEDs
    • Color temperature of 5,700K
    • High output of 48274 lumens
    • 110º wide-angle coverage
    • Multifunction light : flood, blind and strobe
    • CTC linear control from 2000K - 10000K
    • Ultra-high-speed strobe effects
    • Accurate 16bit dimming performance
    • Flicker-free
    • DMX, RDM and wireless control
    • IP65
    • The SGM patented dehumidifier integrated
    • Optionnal barndoors and filters
    • Maintenance-free
    Introduction of the Q-7 W by SGM

    LED Technology

    The Q-7 W mounts 1,000 high-power cool white SMD LEDs to create a powerful but seamless wide-angle projection and a fast-feedback strobe effect. It is not only a powerful flood/blind/strobe but also a precise white luminaire. The Q-7 W uses 16bit dimming performance, and it is completely upgradeable through firmware updates. The LEDs expected lifetime is 50,000 hours.

    Wide coverage with optional accessories

    The 110º beam angle of the Q-7 W not only creates a remarkable strobe effect over large stages, but also a spacious area of light for short-throw purposes. The Q-7 W is designed to illuminate façades, tradeshows, special events, and any application that requires a super bright white flood light with a symmetric and even light projection. Optional accessories like 4-way and 8-way barndoors or filter frames add control and customization. 

    Performance in distance

    While the Q-7 W is able to achieve an impressive performance for any application, this reliable luminaire has an optimum response in distances between 1 and 5 meters. When used as a flood light over surfaces, the Q-7 W offers a bright beam range not only in horizontal but also in vertical coverage.


    This powerful flood/blind/strobe delivers a staggering 48274 verified lumens as maximum output, which is a breathtaking amount of light for only 455W. The Q-7 W offers a bright output in 5700K; the perfect color temperature for TV and film purposes, but also to be combined with sunlight in car shows or fashion events.

    Continuous output and LED frequency control

    Since the Q-7 W is intended to strobe and blind audiences, but also to illuminate surfaces for long-term installs, continuous output is needed. With the Q-7 W the amount of light of the scenes will not be affected over the time. Another powerful feature of the Q-7 W is the ability to change the LEDs frequency, so they can match the shutter adjustments in cameras.

    Mounting options

    The Q-7 W can be rigged by using one or two easy-fit omega bracket with ¼ turn fasteners. It also includes a basic floor stand to increase stability, but allowing the users to access the omega locking points easily. Being fully RDM compatible, the Q-7 W is ideal for installation in non-accessible locations. Multiple Q-7 W units can be rigged in optional BCC-2 and BCC-4 brackets.


    Présentation du Q-7

    About SGM


    IP Rating

    All SGM lights are protected by an IP rating of 65 or 66. The durable IP65-rating ensures that the fixture is kept free of externally induced particles and liquids on internal optics and light sources, such as smoke fluid, dust, dirt, airborne pollution, and humidity. Thereby, the need to clean optics or gobos is eliminated and no internal corrosion will occur. It is ideal for outdoor applications, while being practically maintenance-free making it a sustainable and long-lasting choice for indoor events and installations as well. The IP-66 rating include the same protection, adding a protection against multi-directional, high-pressure water jets while the IP-65 is protected against low pressure.


    Every SGM light is equipped with an internal built-in dehumidifier protecting the fixture from moisture, pollution and any other factors that can generate corrosion. The patented SGM dehumidification not only removes humidity but also prevents oxidation and condensation, while a gore-tex membrane equalizes internal pressure to prevent leaks.

    SGM’s patented DEHUMIDIFIER, incorporated in the SGM product range, constantly removes trapped hydrogen from inside of the lighting fixture in a solid state electrolytic process with no moving parts. SGM’s DEHUMIDIFIER breaks down corrosive H2SO4 molecules, deriving from polluted air, and eliminates the effects hereof. Hereby, the unique process eliminates any risk of humidity, which would otherwise lead to condensation and corrosion.

    Thermal management

    To achieve optimum performance of the LEDs at all times, SGM lights are optimized to manage heat impact through SGM's unique thermal management technology.

    High power light-emitting diodes (LEDs) use up to 5,000 milliwatts or more in a single LED. However, most of the electricity in an LED turns into heat rather than light. In fact, about 70% becomes heat generation while only 30% becomes light. Therefore, in order to get more light from your LEDs, it is crucial to have efficient thermal management. The SGM technology consists of a uniquely designed body and heat sink, which ensures optimal cooling of the LED chips. All SGM LED products consist of SGM's superior thermal management technology and tested under extreme hot and cold conditions, which ensures that the LEDs always operate within safe parameters.


    SGM company

    Originally founded in 1975, SGM brings more than 40 years of experience within the stage lighting business.

    In 2009, SGM decided to bring in industry pioneer Peter Johansen to head the new Research & Development center in Denmark, with the intention to transfer technology, previously only seen possible within stage lighting, into architectural lighting.

    With field expertise dating back to the invention of the smoke machine in the 70s, Peter Johansen, founder of Martin Professional, successfully established the company headquarters in Denmark in 2012, and followed by the introduction of an architectural division offering superior dynamic LED lighting, which comprises colors, strobe effects, pixel lights, positions, patterns, and gobos, in practically maintenance-fee fixtures.

    Source lumineuse1000 x White LEDs
    Beam angle(s)110° fixe
    Addressable pixels4 individually controllable panels
    Total output47 800 lm
    Efficacity105 lm/W
    White temperature5700K
    Control & Program
    ProtocolUSITT DMX512A - CRMX - W-DMX™ G2/G3/G4/G4S
    Setting and addressingControl panel, RDM or RFID
    DMX channels1, 4, 6 or 8
    Wireless DMXLumenRadio CRMX
    Standalone modeQuick white color - Up to 24 programmable scenes - Standalone mode programmable by RFID
    Data (DMX)IP65 Neutrik HD locking XLR 5-pin cable, 0.5m
    Rigging possibilitiesFloor stand (included) or hanging (Omega clamps included)
    Mounting pointsTwo quarter-turn locking points
    Safety featuresFour times two quarter-turn locking points
    Minimum distance to combustible materials0.3 metre
    Minimum distance to illuminated surfaces0.3 metre
    Physical characteristics
    Height497 mm
    Width268 mm
    Depth122 mm
    Weight8.1 kg
    IP classIP65
    MaterialAluminium, tempered glass (lens)
    Temperature range, Operating−40° to +50°C
    Temperature range, Start-up−20° to +50°C
    Temperature range, Storage−40° to +80°C
    CoolingActive, forced air, temperature-regulated, low noise
    Max. humidity98%
    2014/30/EU: EMC DirectiveEN 55103-1, EN 55103-2, EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3
    2014/35/EU: Low Voltage DirectiveEN 60598-1, EN 60598-2-17, EN 62471, EN 60529
    RoHS2 Directive2011/65/EU
    ULStandard 1573
    Additional information
    Included itemsTwo Omega brackets with 1/4-turn fasteners - Floor stand and screws - User manual - Wireless DMX antenna
    Fixture features
    Tilt0 - 190°
    StrobeUltra-high-speed strobe effect (1-50Hz)
    DehumidifierBase / Head
    AC Power, nominal208 - 240VAC 50/60 Hz
    Maximum inrush current @ 240VAC20A
    Power factor0.99 PF (230V)
    PowerPower cable 1m with bare end
    I I I I I



    Accessory Holder - Q-7 / X-5


    Barndoor 4-way


    Barndoor 8 way


    BCC-2 Dual Bracket


    BCC-4 Quad Bracket


    Color Frame - Q-7 / P-5 / i-5


    Flight Case 4 pcs incl. barndoors

    I I I I I

    Recently Viewed

    Compare 0