The P-6 features 24 high-power RGBW 24W LEDs with a superior optical performance. All the components have been designed to achieve the maximum output performance in a lightweight and compact size. The LEDs expected lifetime is 50,000 hours.
The 24 individual lenses of the P-6 deliver a native 10º beam angle with even distribution for long throws. Its standard round and symmetrical beam can be manipulated with an optional set of magnetic holographic filters (19º, 45º, 63º/12º elliptical horizontal and 12º/63º elliptical vertical), an empty frame for custom filters, and barndoors.
One of the most important key points of the P-6 is the possibility of achieving high lux values in a low-profile luminaire. The P-6 delivers lumen and 12000 lux at 5 meters with the 10º native lens; outperforming any other Full-Color LED washes in its size. The optical magnetic filter frames take advantage of this high light output, spreading this powerful illuminance over close and medium distances.
The amazing color selection is the unique identity of the P series worldwide. The P-6 continues this successful development by delivering superior color palette, including outstanding blues, rich salmons, powerful reds, and detailed cyans. This is possible because of the superior SGM's color development, based on accurate calibration and advanced firmware.
The LEDs in the P-6 are divided into six individually controllable segments, which generates wide-ranging color effects and pixel-mapping combinations for creative lighting designs. Each segment provides fast feedback, individual RGB control, and smooth dimming.
The P-6 also delivers many great features such as Plus / Minus Green control for fine tuning, a vast color filter emulation, Quick Color settings, different pixel and strobe pre-programmed macros and effects, and a super-fast strobe with duration and rate parameters.
Because of its integrated handle and included omega brackets, the SGM P-6 is easy to transport, to rig, and to focus. It can be orientated in any position and it comes with 2 x 2 ¼ turn locking points to allow the use of one or two clamps. The built-in safety wire eyelet in the base protects the unit when rigged.