
Static light with fresnel lens - RGBAM LEDS 5x150W - IP65 - Lighweight & compact
New
This lightweight and compact LED luminaire provides color-consistent 0-100% dimming control to achieve the intensity required, with the side benefit of energy and cost savings. Amber and Mint LEDs are added to its RGB color mixing in order to achieve a balanced color spectrum and perfect whites in camera. The LEDs expected lifetime is 50,000 hours and maximum power consumption is 150W.
Hue, tint, tone, and intensity are fully tunable and can be seamlessly adjusted from 2000K - 10000K, with the addition of plus/minus green and individual raw colors. This ensures the uniformity of light and single shadow rendition, while also obtaining a perfect match between the RGBAM colors of the luminaire and the onsite production and environment. All these modes can be adjusted via a manual 4-knob control panel integrated in the base of the luminaire.
Equipped with a hand-made glass Fresnel lens, the optical system is designed to obtain the maximum brightness between 15º and 18º, but allowing the user to perform a tight 10.4º beam at spot position and an impressive 76.6º field angle in flood. The fixture outputs the same versatility that can be expected in a regular fresnel luminaire, with defined and diffuse shadows depending on the selected beam angle. An optional 112º micro-fresnel interchangeable front lens transform the S-4 into a powerful PC-like LED luminaire on stage.
S-4 Fresnel accessories include rotating 4-way barndoors for accurate lighting cuts, magnetic top hat, interchangeable micro-fresnel front lens for higher output, and different mounting brackets. The S-4 Fresnel is also available with a LumenRadio wireless receiver included, to allow remote DMX and RDM control.
The S-4 Fresnel is the first IP65 Fresnel LED light capable of a CRI > , TLCI > , CQS > , and Rf > . Its brightest performance comes at 7,000K with 7265 lumen, while maintaining a high output and consistent chromaticity at 5,600K and 3,200K. The interchangeable micro-fresnel front lens expands the capabilities further by increasing lux values substantially. It also includes linear color control from 2000K - 10000K.
The Macro DMX channel in the S-4 Fresnel includes 91 color presets based on the LEE catalogue, plus/minus Green control, Congo Blue and Deep Red enhancers, RAW control of Amber and Mint LEDs, a simulation of the 14 color-wheel positions used in G-1 Beam, and CCW / CW color scrolls with linear speed increase.
In addition to the accurate and smooth dimming curves designed by SGM, the 16-bit RGB and Intensity control ensures a high-quality dimming and color mixing. The motorized zoom of the S-4 Fresnel was also created to move smoothly through the entire range. To achieve maximum performance, the user can also select “optimized beam narrow” and “optimized beam wide” thresholds in the Function DMX channel.
The S-4 Fresnel can be orientated in any position and it is very easy to manipulate. Because of its integrated base plate with 4 rubber feet and 2 x ¼ turn locking points, the S-4 Fresnel can be rigged with just one omega bracket and it can also be positioned in delicate floors. With a weight of less than 6.95Kg (15.3 lbs), it’s perfect for both big productions as well as small theatres and motion-picture shootings. An optional 28mm spigot can be ordered for tripod. All accessories are delivered with safety wires.
| Optical | |
| Source lumineuse | 5 x 150W LED RGBAM |
| Photometric | |
| Total output | 7265 lm (toutes LEDs) , 264 lm (bleu) , 1103 lm (vert) , 524 lm (rouge) |
| Colour temperature range | 2000K - 10000K |
| Physical characteristics | |
| Height | 422 mm |
| Width | 147 mm |
| Depth | 210 mm |
| Weight | 6.95 kg |
| IP class | IP65 |
| Material | Aluminium, Steel, Plastic, PC/ASA, rubber |
| Environment | |
| Temperature range, Operating | -40°C to 50°C |
| Temperature range, Start-up | -20°C to 50°C |
| Temperature range, Storage | -40°C to 80°C |
| Max. humidity | 98% |
| Approvals | |
| 2014/30/EU: EMC Directive | EN 55103-1, EN 55103-2, EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3 |
| 2014/35/EU: Low Voltage Directive | EN 60598-1, EN 60598-2-17, EN 62471, EN 60529 |
| RoHS2 Directive | 2011/65/EU |
| Fixture features | |
| Tilt | 240° |
| Dimming | Electronic |
| Strobe | Ultra-high-speed strobe effect (1-50Hz) |
| Dehumidifier | Base / Head |
| Power | |
| Consumption | 150W |
| Standby power | 10W |
| AC Power, nominal | 100-240VAC 50/60Hz |
| AC Power, max. rating | 90-264VAC 50/60Hz |
| Mounting points | Two quarter-turn locking points |
| Orientation | Any |
| Safety features | Four times two quarter-turn locking points |
| Minimum distance to combustible materials | 0.3 metre |
| Control & Program | |
| 16-bit control | Dimmer & colors |
| Colour temperature control | 2000K - 10000K |
| Cabled DMX | 5-pin XLR input and output |
| Standalone mode | Couleurs rapides RGBAM + 8 programmes autonomes |
| Transporteur | Information | Livraison |
|---|---|---|
![]() | Parcels delivered the next day before 13pm at your home.The day before delivery, You'll be notified by e-mail and SMS. | |
![]() | Collect the order from our warehouse (EXW) in Lille, France. |