Led Pixels with 56 RGB LEDs - Chain of 6.75 m (including connector) - IP65 

More details


Availability: On Order

1 107,00 €

You will not be charged VAT with your selected delivery address.

- +

  • I I I I I


    • 56 x 4 RGB LEDs per LP-700 string
    • 110º viewing angle
    • 120 mm pitch (60/80/100 mm available via optional spacers)
    • 40 mm Pixels
    • 6.75 meters per LP-700 chain
    • IP65
    • Practically maintenance-free
    • Passive cooling
    Introduction of LP 700

    LED Technology

    Each LP-700 product contains 56 pixels in one string with a 110º viewing angle. The light source consists of 4 x RGB LEDs per panel. In order to configure and control them, the optional LP-700 power supply units and LP-700 power injector cables are needed. The LEDs expected lifetime is 50,000 hours.


    An entire LP-700 system can be controlled via DMX-512A as well as with a dedicated video server or an ordinary PC with ArtNet™(the ArtNet signal is then distributed by a third party ArtNet to DMX Converter). It runs up to 168 DMX controllable channels per LP-700. SGM can supply optional Power+Data DL-1 injector cables to control the units via DMX.

    Mounting options

    The string of pixels are simply clicked into the included aluminum profile defining pixel pitch with the included P120 spacers (120mm / 4.7in). As optional accessories P100, P80, or P60 spacers are available for 100mm/80mm/60mm (3.9in/3.1in/2.4in) pitch. The aluminum profile is then shortened on-site to suit bespoke spacing.


    LP-700 pixel-mapping at Wonderland club in Maidstone, UK

    LP-700 installation in Malmö (Sweden)

    About SGM


    IP Rating

    All SGM lights are protected by an IP rating of 65 or 66. The durable IP65-rating ensures that the fixture is kept free of externally induced particles and liquids on internal optics and light sources, such as smoke fluid, dust, dirt, airborne pollution, and humidity. Thereby, the need to clean optics or gobos is eliminated and no internal corrosion will occur. It is ideal for outdoor applications, while being practically maintenance-free making it a sustainable and long-lasting choice for indoor events and installations as well. The IP-66 rating include the same protection, adding a protection against multi-directional, high-pressure water jets while the IP-65 is protected against low pressure.


    Every SGM light is equipped with an internal built-in dehumidifier protecting the fixture from moisture, pollution and any other factors that can generate corrosion. The patented SGM dehumidification not only removes humidity but also prevents oxidation and condensation, while a gore-tex membrane equalizes internal pressure to prevent leaks.

    SGM’s patented DEHUMIDIFIER, incorporated in the SGM product range, constantly removes trapped hydrogen from inside of the lighting fixture in a solid state electrolytic process with no moving parts. SGM’s DEHUMIDIFIER breaks down corrosive H2SO4 molecules, deriving from polluted air, and eliminates the effects hereof. Hereby, the unique process eliminates any risk of humidity, which would otherwise lead to condensation and corrosion.

    Thermal management

    To achieve optimum performance of the LEDs at all times, SGM lights are optimized to manage heat impact through SGM's unique thermal management technology.

    High power light-emitting diodes (LEDs) use up to 5,000 milliwatts or more in a single LED. However, most of the electricity in an LED turns into heat rather than light. In fact, about 70% becomes heat generation while only 30% becomes light. Therefore, in order to get more light from your LEDs, it is crucial to have efficient thermal management. The SGM technology consists of a uniquely designed body and heat sink, which ensures optimal cooling of the LED chips. All SGM LED products consist of SGM's superior thermal management technology and tested under extreme hot and cold conditions, which ensures that the LEDs always operate within safe parameters.


    SGM company

    Originally founded in 1975, SGM brings more than 40 years of experience within the stage lighting business.

    In 2009, SGM decided to bring in industry pioneer Peter Johansen to head the new Research & Development center in Denmark, with the intention to transfer technology, previously only seen possible within stage lighting, into architectural lighting.

    With field expertise dating back to the invention of the smoke machine in the 70s, Peter Johansen, founder of Martin Professional, successfully established the company headquarters in Denmark in 2012, and followed by the introduction of an architectural division offering superior dynamic LED lighting, which comprises colors, strobe effects, pixel lights, positions, patterns, and gobos, in practically maintenance-fee fixtures.

    Source lumineuse56 x 4 LEDs RGB
    Pixel pitch60, 80, 100 ou 120 mm (standard)
    Viewing angle110°
    Addressable pixels56
    Total output1008 lm
    Efficacity 15 lm/W
    Control & Program
    ProtocolUSITT DMX512A
    DMX channels168
    Rigging possibilitiesMontage sur rail aluminium
    Temperature range, Operating−40° to +50°C
    Temperature range, Start-up−20° to +50°C
    Temperature range, Storage−40° to +80°C
    Max. humidity98%
    AC Power, nominal20V DC (± 0,5V)
    2004/108/EC : Directive CEMEN 55022, EN 61000-6-3, EN 55024, EN 61547
    Physical characteristics
    Weight1,2 kg
    IP classIP44
    MaterialPlastique moulé par injection à haute pression
    Entrée DataConnecteur étanche TE2106135-4
    I I I I I



    LP-700 Data & Power Input


    LP-700 Power Input


    LP-700 Power Supply

    I I I I I

    Recently Viewed

    Compare 0