SGM

SGM

G-Spot Turbo

Spot Moving Head Light with RLB 1000W LED lightsource - IP65

More details

New

I I I I I
 
Description

GSpot turbo

  • High-power 1000 W RLB (Red Lime Blue) LED light source
  • High output of 19973 lumen
  • 8° to 43° zoom range
  • 2 rotatory gobo wheels, FX wheel & a 4-facet prism
  • Ultra-high-speed strobe
  • Extended color palette
  • 2000K - 10000K CTC control
  • Linear frost and smooth iris feature
  • Flicker-free
  • IP65
  • DMX, RDM and wireless control
  • Integrated patented dehumidifier / unique technologie
Introduction of G-Spot Turbo

LED Technology

This tough and reliable LED luminaire includes a powerful Red - Lime - Blue LED engine to enhance lumen output and increase the quality of the light. The G-Spot Turbo is able to create bright and soft colors but also the well-known SGM RGB mixing by using the Green Color Mode feature. The LEDs expected lifetime is 50,000 hours.

Colors

One of the big advantages of the G-Turbo series is the extended color palette. This is caused by the usage of Lime LEDs instead of the Green LEDs available in the G-Spot. Now, it is possible to achieve warmer pastel colors, richer yellows, and a wider variety of green shades. With the special dichroic technology, the G-Spot Turbo is also able to create deep saturated greens and even more contrasted colors.

Optics

With an 8° to 43º zoom range, plus an additional pseudo zoom down to 1º, the G-Spot Turbo is ready for any stage or event. Being water, dirt and sand proof, the internal optics are always clean to get the maximum brightness from the light source. Worst case scenario, the front lens must merely be wiped off, which is a huge time and cost saver effectively eliminating the need for cleaning and maintenance.

Photometrics

The G-Spot Turbo delivers a staggering lumen output not only in white but also in color. It is able to achieve up to 19973 lumen. These high values convert the G-Spot Turbo into the perfect companion not only in medium-sized venues but also in large-scale tours with high audience numbers.

Sharp gobo projection

One of the big benefits of the G-Spot Turbo is its sharp and detailed gobo projection, with no color aberration in the borders or hotspots in the center of the beam. The G-Spot Turbo uses glass gobos not affected by the heat, so the pattern is always fully focused.

Gobo wheel 1 G-SpotGobo wheel #1
Gobo Wheel 2 G-SpotGobo wheel #2
Effect wheel G-SpotFX wheel

White Performance

The G-Spot Turbo is the brightest and most qualified spot in its range. By using the new RLB additive mixing, the G-Spot Turbo is able to output impressive high-CRI whites while maintaining the 2000K - 10000K color temperature control.

Mounting options

The G-Spot Turbo can be rigged with the included easy-fit omega brackets with ¼ turn fasteners, using two of the four locking points. Installation time can be saved onsite as the fixtures can be pre-rigged to HUD truss making the rig fly-ready when reaching the venue. Handles can be found in the base as well to help users mount the fixture.

 
About SGM

THE SGM TECHNOLOGY 

IP Rating

All SGM lights are protected by an IP rating of 65 or 66. The durable IP65-rating ensures that the fixture is kept free of externally induced particles and liquids on internal optics and light sources, such as smoke fluid, dust, dirt, airborne pollution, and humidity. Thereby, the need to clean optics or gobos is eliminated and no internal corrosion will occur. It is ideal for outdoor applications, while being practically maintenance-free making it a sustainable and long-lasting choice for indoor events and installations as well. The IP-66 rating include the same protection, adding a protection against multi-directional, high-pressure water jets while the IP-65 is protected against low pressure.

Dehumidification

Every SGM light is equipped with an internal built-in dehumidifier protecting the fixture from moisture, pollution and any other factors that can generate corrosion. The patented SGM dehumidification not only removes humidity but also prevents oxidation and condensation, while a gore-tex membrane equalizes internal pressure to prevent leaks.

SGM’s patented DEHUMIDIFIER, incorporated in the SGM product range, constantly removes trapped hydrogen from inside of the lighting fixture in a solid state electrolytic process with no moving parts. SGM’s DEHUMIDIFIER breaks down corrosive H2SO4 molecules, deriving from polluted air, and eliminates the effects hereof. Hereby, the unique process eliminates any risk of humidity, which would otherwise lead to condensation and corrosion.

Thermal management

To achieve optimum performance of the LEDs at all times, SGM lights are optimized to manage heat impact through SGM's unique thermal management technology.

High power light-emitting diodes (LEDs) use up to 5,000 milliwatts or more in a single LED. However, most of the electricity in an LED turns into heat rather than light. In fact, about 70% becomes heat generation while only 30% becomes light. Therefore, in order to get more light from your LEDs, it is crucial to have efficient thermal management. The SGM technology consists of a uniquely designed body and heat sink, which ensures optimal cooling of the LED chips. All SGM LED products consist of SGM's superior thermal management technology and tested under extreme hot and cold conditions, which ensures that the LEDs always operate within safe parameters.

ABOUT SGM LIGHT

SGM company

Originally founded in 1975, SGM brings more than 40 years of experience within the stage lighting business.

In 2009, SGM decided to bring in industry pioneer Peter Johansen to head the new Research & Development center in Denmark, with the intention to transfer technology, previously only seen possible within stage lighting, into architectural lighting.

With field expertise dating back to the invention of the smoke machine in the 70s, Peter Johansen, founder of Martin Professional, successfully established the company headquarters in Denmark in 2012, and followed by the introduction of an architectural division offering superior dynamic LED lighting, which comprises colors, strobe effects, pixel lights, positions, patterns, and gobos, in practically maintenance-fee fixtures.

 
Specifications
Optical
Source lumineuseRLB LEDs
Zoom8° to 43° + pseudo zoom 1° to 43°
Beam angle(s)43°
FocusMotorized focus
FrostVariable 0-100%
Prism4-facet rotating prism
Photometric
Total output19973 lm (all LEDs), 1896 lm in blue, 5899 lm in lime, 4523 lm in red
Efficacity20 lm/W
Colour temperature range2000K - 10000K
CRI83
Fixture features
Pan540°
Tilt270°
Iris1-100%, Pulse effects
StrobeUltra-high-speed strobe effect (1-50Hz)
Gobo wheels2 independent rotatable gobo wheels of 5 indexable gobos + open each
Effect wheels2 independent effect wheels with semi-continuous effect
DehumidifierBase / Head
Connectivity
Data (DMX)IP65 Neutrik HD locking XLR 5-pin cable, 0.2m
Physical characteristics
Height805 mm
Width470 mm
Depth492 mm
Weight52 kg
IP classIP65
MaterialVerre trempé, aluminium, plastique PA6.6, acier
Environment
Temperature range, Operating-40°C to 50°C
Temperature range, Start-up-20°C to 50°C
Temperature range, Storage-40°C to 80°C
Max. humidity98%
Approvals
2014/30/EU: EMC DirectiveEN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3
2014/35/EU: Low Voltage DirectiveEN 60598-1, EN 60598-2-17, EN 62471, EN 60529
RoHS2 Directive2011/65/EU
Additional information
Included itemsTwo Omega brackets with 1/4-turn fasteners - 2 metres Power Cable with Neutrik TRUE1 powerCON - User manual
Control & Program
Setting and addressingControl panel, RDM or RFID
16-bit controlDimmer, colors, pan/tilt, gobo index/rotation, zoom, focus
Colour temperature control2000K - 10000K
Cabled DMX5-pin XLR input and output
Wireless DMXLumenRadio with RDM
Standalone modeUp to 24 programmable scenes
Gobos
Glass goboBorosilicate high-temperature glass
Maximum thickness1.1 mm black & white or 3.5 mm colored glass or textured gobos
Outside diameter37.5 mm (Standard E size gobo)
Metal goboNot recommended
Status Report
DMX Port4
Power
Consumption1000W
Standby power70W
AC Power, nominal208 - 240VAC 50/60 Hz
AC Power, max. rating190 - 264VAC 50/60 Hz
Mounting pointsFour times two quarter-turn locking points
OrientationAny
Safety featuresFour times two quarter-turn locking points
Minimum distance to illuminated surfaces0.3 metre
I I I I I

Accessories

SGM

A-4

SGM

Flight Case for 1x G-Spot

SGM

IP65 Test Kit

SGM

Omega Bracket

SGM

TRUE1 Power Cable

I I I I I

Recently Viewed

Compare 0