Tube LED pour Graphique 3D - LEDs RGB - 1 mètre ou 2 mètre - IP65 - contrôlable par DMX

More details


Availability: In Stock

259,00 €

You will not be charged VAT with your selected delivery address.

- +

  • I I I I I


    • 40W RGB pixel 3D graphic LED tube
    • 2 versions : 2 x 27 pixels (1 meter) or 2 x 54 pixels (2 meter) per tube
    • 2 x 130º viewing angle
    • Up to 162 controllable DMX channels through TLD-612A / ILD
    • 35mm pixel pitch
    • IP65
    • Practically maintenance-free
    • Lightweight construction
    Introduction of LT 100

    LED Technology

    Each LT product contains 27 (1-meter version) or 54 (2-meter version) pixels in two 130º viewing angles. One tube mounts 2 x 27 RGB LEDs (for 1-meter length) or 2 x 54 RGB LEDs (for 2-meter length). To configure and control up to six LTs, it is recommendable to deploy either SGM’s TLD-612A or ILD driver. The LEDs expected lifetime is 50,000 hours.


    The LT can be operated by SGM’s TLD-612A or ILD drivers. An entire system can be controlled via DMX-512A, a dedicated video server, or an ordinary PC with ArtNet™ (the ArtNet signal is then distributed by a third party ArtNet to DMX Converter).


    To setup the full configuration of the LT, SGM offers the ArtNet Configurator, which is an extremely powerful software. The ArtNet Configurator offers the possibility of configuring ArtNet and DMX-512A to fit the selected controlling system when using TLD-612A or ILD drivers with LT units. This software is also compatible with the SGM A-4 ArtNet to DMX converter.


    This 3D LED graphic tube can be suspended from the ceiling, providing a staggering overhead 3D vertical and horizontal zip effect. However, it is not limited to a suspension mode, as it can be floor-mounted or integrated into a scenery in creative ways.

    Mounting options

    There are various mounting options according to the length selected. Each LT-100 graphic tube has a maximum length of 1 meter, while it is 2-meters for the LT-200. Up to six LT-100 input connectors can be directly wired to a TLD-612A or an ILD driver. The LT-200 can also be wired by 6 to a TLD-612A driver, while up to 3 LT-200 can be wired to an ILD driver. Those can be hung with regular clamps or just be attached to a surface. Since the LT-100 and the LT-200 cable is 0.85m long and include a top bracket, the tubes can be hung in different positions. An optional LT mount is also available for a more accurate setup.


    225 LT-100 at Wonderland Clun

    16 strobes XC-5, 16 SixPack, 350 LD-5...

    LT-200 on the "berges" of Paris

    SGM animates in 3D video the sky of the Belgian Festival Pukkelpop with 3300 LED Tubes

    SGM animates in 3D video the sky of the Belgian Festival Pukkelpop with 3300 LED Tubes

    About SGM


    IP Rating

    All SGM lights are protected by an IP rating of 65 or 66. The durable IP65-rating ensures that the fixture is kept free of externally induced particles and liquids on internal optics and light sources, such as smoke fluid, dust, dirt, airborne pollution, and humidity. Thereby, the need to clean optics or gobos is eliminated and no internal corrosion will occur. It is ideal for outdoor applications, while being practically maintenance-free making it a sustainable and long-lasting choice for indoor events and installations as well. The IP-66 rating include the same protection, adding a protection against multi-directional, high-pressure water jets while the IP-65 is protected against low pressure.


    Every SGM light is equipped with an internal built-in dehumidifier protecting the fixture from moisture, pollution and any other factors that can generate corrosion. The patented SGM dehumidification not only removes humidity but also prevents oxidation and condensation, while a gore-tex membrane equalizes internal pressure to prevent leaks.

    SGM’s patented DEHUMIDIFIER, incorporated in the SGM product range, constantly removes trapped hydrogen from inside of the lighting fixture in a solid state electrolytic process with no moving parts. SGM’s DEHUMIDIFIER breaks down corrosive H2SO4 molecules, deriving from polluted air, and eliminates the effects hereof. Hereby, the unique process eliminates any risk of humidity, which would otherwise lead to condensation and corrosion.

    Thermal management

    To achieve optimum performance of the LEDs at all times, SGM lights are optimized to manage heat impact through SGM's unique thermal management technology.

    High power light-emitting diodes (LEDs) use up to 5,000 milliwatts or more in a single LED. However, most of the electricity in an LED turns into heat rather than light. In fact, about 70% becomes heat generation while only 30% becomes light. Therefore, in order to get more light from your LEDs, it is crucial to have efficient thermal management. The SGM technology consists of a uniquely designed body and heat sink, which ensures optimal cooling of the LED chips. All SGM LED products consist of SGM's superior thermal management technology and tested under extreme hot and cold conditions, which ensures that the LEDs always operate within safe parameters.


    SGM company

    Originally founded in 1975, SGM brings more than 40 years of experience within the stage lighting business.

    In 2009, SGM decided to bring in industry pioneer Peter Johansen to head the new Research & Development center in Denmark, with the intention to transfer technology, previously only seen possible within stage lighting, into architectural lighting.

    With field expertise dating back to the invention of the smoke machine in the 70s, Peter Johansen, founder of Martin Professional, successfully established the company headquarters in Denmark in 2012, and followed by the introduction of an architectural division offering superior dynamic LED lighting, which comprises colors, strobe effects, pixel lights, positions, patterns, and gobos, in practically maintenance-fee fixtures.

    Related articles
    For Christmas, the SGM LED tubes creates magical 3D effects on the riversides of Paris

    For Christmas, the SGM LED tubes creates magical 3D effects on the...


    For Christmas, the "berges" (riverside) of Paris are illuminated by magical 3D effects made with 108 SGM LT-200

    Pukkelpop Festival festooned with 3,300 LT-200 LED tubes

    Pukkelpop Festival festooned with 3,300 LT-200 LED tubes


    At the 28th edition of Belgian Pukkelpop Festival, the Boiler Room (the main electro stage) was festooned with 3,300...

    Source lumineuse27 x LEDs RGB 2W [LT-100] / 54 x LEDs RGB 2W [LT-200]
    Pixel pitch35 mm
    Viewing angle2 x 130°
    Addressable pixels27 [LT-100] / 54 [LT-200]
    Total output510 lm [LT-100] / 1020 lm [LT-200]
    Efficacity25 lm
    Control & Program
    ProtocolUSITT DMX512A
    DMX channels81 [LT-100] / 162 [LT-200]
    DriversTLD-612 / TLD-612A / ILD
    Rigging possibilitiesCrochet pour accroche verticale à l'extrémité du tube
    Safety featuresPossibilité de passer une élingue de sécurité dans le crochet
    Temperature range, Operating−40° to +50°C
    Temperature range, Start-up−20° to +50°C
    Temperature range, Storage−40° to +80°C
    Max. humidity98%
    Consumption20W [LT-100] / 40W [LT-200]
    AC Power, nominal12 V DC (± 0,2V)
    2004/108/EC : Directive CEMEN 55022, EN 61000-6-3, EN 55024, EN 61547
    Physical characteristics
    Weight330 g [LT-100] / 560 g [LT-200]
    IP classIP65
    MaterialAcrylique et aluminium
    Entrée DataConnecteur verrouillable RS-765 4 broches femelle
    I I I I I





    LT Mount (6 pcs)



    I I I I I

    Recently Viewed

    Compare 0