SGM

SGM

LD-5

Semi-recessed dome with 4 RGB LEDs - IP65 - 80mm diameter - DMX control

More details

New

SGMLD5

Availability: In Stock

57,00 €

You will not be charged VAT with your selected delivery address.

- +

  • I I I I I
     
    Description

    LD5

    • 4 RGB SMD LEDs per dome
    • 180º viewing angle
    • DMX control
    • 1.5W power consumption
    • 80mm diameter
    • IP65 (front of product), IP20 (back of product)
    • Practically maintenance-free
    • Passive cooling
    Introduction of LD-5

    LED Technology

    Each LD-5 product contains 1 pixel with 180º viewing angle. The light source consists of 4 x RGB LEDs with SMD technology. In order to configure and control up to 35 domes in a single chain, the optional LD-5 power supply unit and power injector cable are needed. The LEDs expected lifetime is 50,000 hours hours.

    Control

    An entire LD-5 system can be controlled via DMX-512A as well as with a dedicated video server or ordinary PC with ArtNet™ (the ArtNet signal is then distributed by a third party ArtNet to DMX Converter). SGM can supply optional Power+Data DL-1 injector cables to control the units via DMX.

    Construction

    The LD-5 consists of an opaque UV resistant PMM dome with a diameter of 60mm / 2.4in, surrounded by a satin aluminum bezel resulting in an outer diameter of 80mm / 3.1in. It is constructed to be semi-recessed into cut-out with a diameter of 66mm / 2.6in and a maximum material thickness of 20mm / 0.8in.

    IP rating

    The LD-5 front is IP65 (front of product), IP 20 (back of product)-rated, while the back of the product is IP20. The durable IP65 (front of product), IP 20 (back of product)-rating of the LD-5 ensures that the units are kept free of externally induced particles and liquids, such as smoke fluid, dust, dirt, airborne pollution, and humidity. It is ideal for outdoor applications, while being practically maintenance-free makes it a sustainable and long-lasting choice for indoor events and installations as well.

    Mounting options

    The LD-5 can be attached to any kind of surface, as long as it fits the physical dimensions of the dome. It comes with flush mount for easy installation. DC power and data go directly through one RJ45 input and one RJ45 output.

     
    Vidéos

    Présentation du LD-5

    350 dômes LD-5 installés dans des lanternes en papier

     
    About SGM

    THE SGM TECHNOLOGY 

    IP Rating

    All SGM lights are protected by an IP rating of 65 or 66. The durable IP65-rating ensures that the fixture is kept free of externally induced particles and liquids on internal optics and light sources, such as smoke fluid, dust, dirt, airborne pollution, and humidity. Thereby, the need to clean optics or gobos is eliminated and no internal corrosion will occur. It is ideal for outdoor applications, while being practically maintenance-free making it a sustainable and long-lasting choice for indoor events and installations as well. The IP-66 rating include the same protection, adding a protection against multi-directional, high-pressure water jets while the IP-65 is protected against low pressure.

    Dehumidification

    Every SGM light is equipped with an internal built-in dehumidifier protecting the fixture from moisture, pollution and any other factors that can generate corrosion. The patented SGM dehumidification not only removes humidity but also prevents oxidation and condensation, while a gore-tex membrane equalizes internal pressure to prevent leaks.

    SGM’s patented DEHUMIDIFIER, incorporated in the SGM product range, constantly removes trapped hydrogen from inside of the lighting fixture in a solid state electrolytic process with no moving parts. SGM’s DEHUMIDIFIER breaks down corrosive H2SO4 molecules, deriving from polluted air, and eliminates the effects hereof. Hereby, the unique process eliminates any risk of humidity, which would otherwise lead to condensation and corrosion.

    Thermal management

    To achieve optimum performance of the LEDs at all times, SGM lights are optimized to manage heat impact through SGM's unique thermal management technology.

    High power light-emitting diodes (LEDs) use up to 5,000 milliwatts or more in a single LED. However, most of the electricity in an LED turns into heat rather than light. In fact, about 70% becomes heat generation while only 30% becomes light. Therefore, in order to get more light from your LEDs, it is crucial to have efficient thermal management. The SGM technology consists of a uniquely designed body and heat sink, which ensures optimal cooling of the LED chips. All SGM LED products consist of SGM's superior thermal management technology and tested under extreme hot and cold conditions, which ensures that the LEDs always operate within safe parameters.

    ABOUT SGM LIGHT

    SGM company

    Originally founded in 1975, SGM brings more than 40 years of experience within the stage lighting business.

    In 2009, SGM decided to bring in industry pioneer Peter Johansen to head the new Research & Development center in Denmark, with the intention to transfer technology, previously only seen possible within stage lighting, into architectural lighting.

    With field expertise dating back to the invention of the smoke machine in the 70s, Peter Johansen, founder of Martin Professional, successfully established the company headquarters in Denmark in 2012, and followed by the introduction of an architectural division offering superior dynamic LED lighting, which comprises colors, strobe effects, pixel lights, positions, patterns, and gobos, in practically maintenance-fee fixtures.

     
    Specifications
    Optical
    Source lumineuse4 x LEDs SMD RGB
    Viewing angle180°
    Control & Program
    ProtocolUSITT DMX512A
    Rigging possibilitiesEncastrable
    OrientationAny
    Environment
    Temperature range, Operating−40° to +50°C
    Temperature range, Start-up−20° to +50°C
    Temperature range, Storage−40° to +80°C
    CoolingPassive
    Max. humidity98%
    Power
    Consumption2W
    AC Power, nominal24V DC (± 0,5V)
    Physical characteristics
    Weight80 g
    IP classIP65 (face avant) - IP20 (face arrière)
    MaterialAluminium et plastique
    Connectivity
    Entrée DataRJ45
    Sortie DataRJ45
    I I I I I

    Accessories

    SGM

    Data & Power Injector for LD-5

    SGM

    LD-5 Power Supply

    I I I I I

    Recently Viewed

    Compare 0