SGM

SGM

LB-100

0.85 m string with 7 RGB LEDs Balls - IP65 - DMX Control 

More details

New

SGMLB100

Availability: In Stock

103,00 €

You will not be charged VAT with your selected delivery address.

- +

  • I I I I I
     
    Description

    LB

    • 7 RGB LED Balls per 0.85 m string
    • Full 360º viewing angle
    • DMX control through TLD-612A / ILD
    • 120 mm pixel pitch
    • Maximum length of 6.8 meters (56 balls) per output
    • IP65
    • Practically maintenance-free
    • Flexible cable between spheres
    Example of application : Petra Marklund Tour (3360 LB100)

    LED Technology

    Each LB-100 product contains seven white LED balls with a diameter of 28 mm. Each ball mounts a 2W RGB LED. In order to configure and control up to six strings of linked balls, a SGM TLD-612A or ILD driver is needed. The LEDs expected lifetime is 50,000 hours hours.

    Control

    The LB-100 can be operated by TLD-612A or ILD drivers. An entire system can be controlled via DMX-512A, a dedicated video server, or an ordinary PC with ArtNet™(the ArtNet signal is then distributed by a third party ArtNet to DMX Converter).

    Software

    To setup the full configuration of the LB-100, SGM offers the ArtNet Configurator, an extremely powerful software. The ArtNet Configurator offers the possibility of configuring ArtNet and DMX-512A to fit the selected controlling system when using TLD-612A or ILD drivers with LB-100 units. This software is also compatible with the SGM A-4 ArtNet to DMX converter.

    Mounting options

    Up to six LB-100 input connectors can be directly wired to a TLD-612A, and those can be hung with regular clamps or just be attached to a surface. Each LB-100 output can be connected to a new LB-100. Up to eight LB-100 (56 LED balls) can be connected in one single string, which means that up to 48 LB-100 (336 LED balls) can be controlled by one single TLD-612A driver. Each LB-100 string can extend to a maximum length of 6.8 meters. Since the LB-100 cable is flexible, the balls can be hung in almost any position.

     
    Vidéos

    British Telecom Advertisement : 3500 LB-100

     
    About SGM

    THE SGM TECHNOLOGY 

    IP Rating

    All SGM lights are protected by an IP rating of 65 or 66. The durable IP65-rating ensures that the fixture is kept free of externally induced particles and liquids on internal optics and light sources, such as smoke fluid, dust, dirt, airborne pollution, and humidity. Thereby, the need to clean optics or gobos is eliminated and no internal corrosion will occur. It is ideal for outdoor applications, while being practically maintenance-free making it a sustainable and long-lasting choice for indoor events and installations as well. The IP-66 rating include the same protection, adding a protection against multi-directional, high-pressure water jets while the IP-65 is protected against low pressure.

    Dehumidification

    Every SGM light is equipped with an internal built-in dehumidifier protecting the fixture from moisture, pollution and any other factors that can generate corrosion. The patented SGM dehumidification not only removes humidity but also prevents oxidation and condensation, while a gore-tex membrane equalizes internal pressure to prevent leaks.

    SGM’s patented DEHUMIDIFIER, incorporated in the SGM product range, constantly removes trapped hydrogen from inside of the lighting fixture in a solid state electrolytic process with no moving parts. SGM’s DEHUMIDIFIER breaks down corrosive H2SO4 molecules, deriving from polluted air, and eliminates the effects hereof. Hereby, the unique process eliminates any risk of humidity, which would otherwise lead to condensation and corrosion.

    Thermal management

    To achieve optimum performance of the LEDs at all times, SGM lights are optimized to manage heat impact through SGM's unique thermal management technology.

    High power light-emitting diodes (LEDs) use up to 5,000 milliwatts or more in a single LED. However, most of the electricity in an LED turns into heat rather than light. In fact, about 70% becomes heat generation while only 30% becomes light. Therefore, in order to get more light from your LEDs, it is crucial to have efficient thermal management. The SGM technology consists of a uniquely designed body and heat sink, which ensures optimal cooling of the LED chips. All SGM LED products consist of SGM's superior thermal management technology and tested under extreme hot and cold conditions, which ensures that the LEDs always operate within safe parameters.

    ABOUT SGM LIGHT

    SGM company

    Originally founded in 1975, SGM brings more than 40 years of experience within the stage lighting business.

    In 2009, SGM decided to bring in industry pioneer Peter Johansen to head the new Research & Development center in Denmark, with the intention to transfer technology, previously only seen possible within stage lighting, into architectural lighting.

    With field expertise dating back to the invention of the smoke machine in the 70s, Peter Johansen, founder of Martin Professional, successfully established the company headquarters in Denmark in 2012, and followed by the introduction of an architectural division offering superior dynamic LED lighting, which comprises colors, strobe effects, pixel lights, positions, patterns, and gobos, in practically maintenance-fee fixtures.

     
    Specifications
    Optical
    Source lumineuse7 x LEDs RGB 2W
    Pixel pitch120 mm
    Viewing angle360°
    Addressable pixels7 (contrôle de chaque LED en RGB)
    Photometric
    Total output77 lm
    Efficacity1,3 lm/W
    Control & Program
    ProtocolUSITT DMX512A
    DMX channels21
    DriversTLD-612 / TLD-612A / ILD
    Rigging possibilitiesMontage par connecteur RS-765 4 broches / Lignes de 8 LB-100 max. soit 6,8 mètres
    OrientationAny
    Environment
    Temperature range, Operating−40° to +50°C
    Temperature range, Start-up−20° to +50°C
    Temperature range, Storage−40° to +80°C
    CoolingPassive
    Max. humidity98%
    Power
    Consumption7,5W
    AC Power, nominal12 V DC (± 0,2V)
    Approvals
    2004/108/EC : Directive CEMEN 55022, EN 61000-6-3, EN 55024, EN 61547
    Physical characteristics
    Weight140 g
    IP classIP65
    MaterialSilicone et caoutchouc
    Connectivity
    Entrée DataConnecteur verrouillable RS-765 4 broches femelle
    Sortie DataConnecteur verrouillable RS-765 4 broches mâle
    I I I I I

    Accessories

    SGM

    ILD

    SGM

    TLD-612

    I I I I I

    Recently Viewed

    Compare 0